Trucks MUST follow the green path as outlined on the first map below.

NOTICE: The Tracy-Clark exit (32) is now closed and has been replaced with the USA Parkway exit (32). Maps do not yet indicate this new exit. Our maps will be updated as soon as possible.

Directions for freight deliveries (green path on first map).

From Interstate 80, take exit 32 (USA Parkway).

There will be a sign over the road reading, "USA Parkway". Continue (0.7) mile and turn Right at Waltham Way. There will be a sign that reads TRACY PLANT.

At 1.6 miles you will see a large power plant (Sierra Pacific) on the right. East of the power plant is the Duraflex International factory.  "DURAFLEX"  is painted in large print on our eastern building. There is a railroad crossing between 2 sections of chain-link fence. This is where you must turn. You will be able to clearly see our factory at this point. After crossing the tracks the road curves to the left. You will then take the first right, across another set of tracks--this road leads directly into Duraflex. All trucks should follow the signs to the appropriate unloading area.

Directions for automobile traffic ONLY

From Interstate 80, take exit 32 (USA Parkway).

Take the first left, which is about 100 yards after the 4-lane begins. The road will go under the underpass. Take a right at the stop sign. At the fork in the road, stay to the left; do not go under this underpass. Continue on the frontage road on the south side of the freeway towards the power plant. The road curves to the left and crosses a one-lane bridge. There is a guard shack on the right; continue past the shack a few yards and turn left at the gate. There is covered parking or you can park near the building. Use the Office Entrance located at the northwest corner of the building.